Product parameter hrang hrang
|
PARAMETER a ni |
SUPPLY VOLTAGE a ni 3.3V / 5.0V |
THIL TIH DAN |
|
Frequency range a ni |
10 ~ 52MHz a ni |
-- |
|
Frequency tolerance a ni |
±1.0ppm a ni |
A tir lamah chuan tol. @+25℃a ni |
|
Frequency a nghet thei hle |
±0.05ppm / ±0.1ppm / ±0.14ppm / ±0.28ppm a ni |
A hnuaia note hi table-ah hian en rawh |
|
Operating temperature range a ni |
-30 atanga +85℃/ -40 atanga +85℃/ -55 atanga +85℃thleng |
A chung lam stabilities thlenga inzawmkhawmin. |
|
Kum khatah tar chak lutuk |
±1.0ppm a ni |
@+25℃a ni |
|
Output waveform a ni |
Clipped sine wave a ni |
-- |
|
Output load a ni |
10kΩ/10pF a ni |
-- |
|
Output voltage level a ni |
0.8Vp-p |
A tlem berah chuan |
|
Phase noise (entirnan 19.2MHz) 1.1. |
A rilru a buai em em a, a rilru a hah em em bawk a. -135dBc/Hz / -148dBc/Hz |
@100Hz / 1kHz / 10kHz a ni |
|
Phase jitter RMS a ni |
<1ps |
12kHz f aia tlem emaw, tlukpui emaw 20MHz aia tlem emaw, tlukpui emaw |
|
Supply current a awm bawk |
10mA a ni |
@10kΩ/10pF ah a awm |
|
Note: Frequency stability chu +25℃atanga temperature range atanga frequency deviation a ni. |
||
Product Features te pawh a awm
■ A tenau 5.0x3.2x1.6 a ni a, solder pad 4 a awm bawk
■ Temperature range chhunga stability nghet tak neih
Dilna hrang hrang
- Low Frequency TCXO Oscillators 5032-TR53S4 series hi: WiMAX / WLAN / Ethernet / Telecommunication / Mobil application-ah te hman a ni nasa hle
Product a thatna te
Stability sang tak a nei
Frequency stability chu ±0.05ppm / ±0.1ppm / ±0.14ppm / ±0.28ppm a ni thei.
Kum upa lam rate a hniam
±1.0ppm@+25℃a ni.
hriatpuina lehkha
Low Frequency TCXO Oscillators 5032-TR53S4 hi RoHS/REACH-certified, lead-free, leh halogen nei lo a ni.
FAQ
Q: Cliped sine wave output nei TCXO 5032 tan hian operating frequency range hman tlanglawn tak chu eng nge ni?
A: Suzhou Hangjing-a 5032-TR53S4 hi 10 MHz atanga 52 MHz thleng a ni a, hei hian wireless communication, Mobil application emaw test equipment application tam zawka frequency mamawh a phuhruk a ni.
Q: He TCXO 5032 hian eng ang output waveform nge a pek?
A: Cliped sine wave output a pe a. A tlangpuiin standard 10 kΩ // 10 pF load hmanga load a nih chuan output voltage chu 0.8 Vpp (peak-to-peak) tal a ni.
hot tags .: low frequency tcxo oscillators 5032, China low frequency tcxo oscillators 5032 siamtute, supplier te
